◆
CRM-III
Suraksha
Pathshala
SAFETY LEARNING HUB · BOKARO STEEL PLANT
Home
Safety Academy
Unit Courses
Quiz Arena
Library
Safety Bytes
Knowledge Hub
☎ Emergency
Login
← All topics
CRM-III · SAFETY QUIZ
PPE & Personal Safety
Select a level and answer each question. You can revisit answers before submitting.
13 published questions
All
13
Foundation
7
Practical
3
Advanced
3
0 / 10 answered
Choose the best answer
QUESTION 01 / 10
Practical
During a pre-use inspection, a safety helmet has a cracked shell. What should the worker do?
A
Cover the crack with tape
B
Remove it from service and replace it
C
Use it only for short tasks
D
Wear a cap beneath it
Question reference image
QUESTION 02 / 10
Foundation
An operator finds the visor of chemical-splash goggles badly scratched before acid sampling. What should happen?
A
Wear them only for a short sample
B
Use a face shield without considering eye protection
C
Replace them with suitable undamaged eye protection before work
D
Polish the lenses with solvent at the sampling station
QUESTION 03 / 10
Practical
During pre-use inspection, a safety helmet has a visible crack. What should the worker do?
A
Cover the crack with tape
B
Use it only for a short task
C
Remove it from service and obtain an approved replacement
D
Wear a cap underneath to compensate
QUESTION 04 / 10
Foundation
A pickling-line operator is assigned work near an acid splash hazard. Which basis should determine the required face and body protection?
A
The PPE used by the previous shift
B
The chemical hazard assessment and approved work procedure
C
The lightest PPE available in the store
D
The operator’s personal preference
QUESTION 05 / 10
Foundation
A face shield is worn for grinding. What additional eye protection is normally required?
A
Safety spectacles or goggles
B
No other protection
C
Ordinary reading glasses
D
A cloth mask
Question reference image
QUESTION 06 / 10
Foundation
A worker plans to handle sharp steel strip near a powered bridle roll. What is the key PPE-related concern?
A
Cut-resistant gloves may create an entanglement hazard near moving rolls
B
Thicker gloves always eliminate entanglement
C
Safety shoes prevent hand injury at the nip point
D
A face shield makes guarding unnecessary
QUESTION 07 / 10
Advanced
A chemical splash task has both eye and inhalation hazards. What determines the complete PPE ensemble?
A
One universal PPE kit
B
A task-specific assessment of exposure routes
C
The PPE worn by the supervisor
D
The colour of the chemical drum
QUESTION 08 / 10
Advanced
A maintenance task involves an atmosphere of unknown oxygen concentration. Which statement is correct?
A
A filtering respirator is sufficient for any atmosphere
B
Ordinary dust masks supply oxygen
C
Entry requires assessment and approved confined-space/respiratory controls; filtering respirators do not supply oxygen
D
A face shield can substitute for respiratory protection
QUESTION 09 / 10
Practical
A worker needs to remove a strip jam near rotating rollers. What is the safest first action?
A
Wear thicker gloves and reach in
B
Slow the rollers and pull the strip
C
Stop work and apply the approved isolation/LOTO procedure
D
Ask another worker to hold the strip
QUESTION 10 / 10
Advanced
A maintenance worker has a full-body harness but no verified anchorage at a CRM platform. Which statement is accurate?
A
The harness alone provides fall arrest
B
A coworker can hold the lanyard during the job
C
A handrail may be used as any convenient anchor
D
Work must not proceed until an appropriate anchorage and fall-protection arrangement are established
Question navigator
Green = answered · Blue = current
← Previous
Question 1
Next →
Submit & review →
⌂
Home
▤
Learn
▣
Units
✎
Share
☎
Emergency