◆
CRM-III
Suraksha
Pathshala
SAFETY LEARNING HUB · BOKARO STEEL PLANT
Home
Safety Academy
Unit Courses
Quiz Arena
Library
Safety Bytes
Knowledge Hub
☎ Emergency
Login
← All topics
CRM-III · SAFETY QUIZ
Fire & Emergency
Select a level and answer each question. You can revisit answers before submitting.
13 published questions
All
13
Foundation
7
Practical
3
Advanced
3
0 / 10 answered
Choose the best answer
QUESTION 01 / 10
Practical
Smoke is spreading into an escape route. Which action is appropriate?
A
Use the designated alternate safe exit
B
Enter the smoke to collect belongings
C
Use a lift to evacuate
D
Wait for a supervisor inside the smoke
Question reference image
QUESTION 02 / 10
Advanced
A welding job is planned in a non-designated area during major mill repair. What does SG/38 require?
A
Only verbal permission from the welder
B
A longer welding cable
C
An open ventilation door in every case
D
Implementation of the hot-work permit and removal of combustible material
QUESTION 03 / 10
Practical
During welding near combustible packaging, which control is required before starting hot work?
A
Keep a water bottle nearby and start
B
Move packaging closer to monitor sparks
C
Use an approved hot-work permit and remove or shield combustibles
D
Rely on the welding helmet to prevent ignition
QUESTION 04 / 10
Foundation
Why should oil-soaked rags be removed before hot work in a mill?
A
They can become ignition fuel
B
They reduce the coil barcode quality
C
They interfere only with housekeeping scores
D
They make the hydraulic system overheat instantly
QUESTION 05 / 10
Foundation
Which system is listed as a fire-risk control in SPM coil preparation?
A
Fire/smoke detection and suppression systems
B
An automatic thickness gauge alone
C
A larger coil saddle alone
D
A faster strip inspection table
QUESTION 06 / 10
Foundation
Which fire-safety provision does the EOT crane standard specify for the operator cabin?
A
An open bucket of sand
B
A portable CO2 extinguisher of suitable capacity
C
A water hose connected to the live electrical panel
D
An unmarked aerosol can
QUESTION 07 / 10
Advanced
After evacuation during a fire emergency, what must employees do before returning to work?
A
Return once the alarm sound stops
B
Return after their own area appears clear
C
Wait until colleagues return to the building
D
Remain at the assembly point for headcount and wait for the authorized all-clear
QUESTION 08 / 10
Foundation
What is the first action on discovering a fire in a plant area?
A
Raise the alarm using the site procedure
B
Attempt firefighting alone
C
Continue work until the next break
D
Open all nearby doors
Question reference image
QUESTION 09 / 10
Foundation
Which three elements are needed for the fire triangle?
A
Fuel, oxygen and sufficient heat
B
Fuel, smoke and pressure
C
Oxygen, water and carbon dioxide
D
Heat, smoke and an alarm
QUESTION 10 / 10
Foundation
What is the safest first response when you discover a fire in a CRM-III work area?
A
Try to extinguish it before informing anyone
B
Raise the alarm and warn others while moving away from danger
C
Continue work until the shift ends
D
Open all doors to investigate the smoke
Question navigator
Green = answered · Blue = current
← Previous
Question 1
Next →
Submit & review →
⌂
Home
▤
Learn
▣
Units
✎
Share
☎
Emergency