◆
CRM-III
Suraksha
Pathshala
SAFETY LEARNING HUB · BOKARO STEEL PLANT
Home
Safety Academy
Unit Courses
Quiz Arena
Library
Safety Bytes
Knowledge Hub
☎ Emergency
Login
← All topics
CRM-III · SAFETY QUIZ
Crane & Lifting
Select a level and answer each question. You can revisit answers before submitting.
13 published questions
All
13
Foundation
6
Practical
3
Advanced
4
0 / 4 answered
Choose the best answer
QUESTION 01 / 4
Advanced
Before handing an EOT crane back after maintenance, which action is specifically required?
A
Leave the warning flags in place for the next shift
B
Inspect the crane, remove loose items, restore guards and complete controlled handover
C
Restart immediately when the last mechanic descends
D
Ask adjacent cranes to move the repaired crane
QUESTION 02 / 4
Advanced
A lift uses a crane, lifting beam and slings with different rated capacities. Which principle governs the lift?
A
The permissible load is limited by the lowest-rated applicable component in the actual configuration
B
The crane capacity alone determines the permissible load
C
The sling rating can be ignored if a lifting beam is used
D
The combined sum of all component ratings determines the load limit
QUESTION 03 / 4
Advanced
Maintenance is underway on a middle EOT crane. Where does the cited standard specify rail stops?
A
On one side, immediately against the crane
B
Only at the far end of the shop
C
On both sides, six metres away from the crane
D
At any distance chosen by the adjacent operator
QUESTION 04 / 4
Advanced
A load centre of gravity is offset from the lifting point. What hazard should the lift plan address?
A
Unexpected tilting or rotation
B
Reduced electrical voltage
C
Excessive ventilation
D
Incorrect paint marking
Question navigator
Green = answered · Blue = current
← Previous
Question 1
Next →
Submit & review →
⌂
Home
▤
Learn
▣
Units
✎
Share
☎
Emergency